1 / 4
American Morse Equipment keyer base and leg strap attach plate — image 1
1 / 4

American Morse Equipment keyer base and leg strap attach plate

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Preliminary estimate for PETG

€0.62 – €0.76 net (excluding VAT)

For file: locking pad_0.4n_0.2mm_PETG_MK4IS_31m.bgcode

This is an estimate for one file. You’ll confirm the exact price before ordering.

File and estimate settings

File used for this estimate

Average indicative estimate: €0.69 excluding VAT (range midpoint).

Weight reported by the author
13 g
Print time reported by the author
31.2 min
Source material
PET
Estimate material
PETG
Estimate printer
Bambu Lab P1S - 0.4 nozzle
Estimate process
0.20mm Standard

Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.

Saved on this device.

Lightweight base and leg strap attachment plate for American Morse Equiepment keyer

Rating
0 / 5
Likes
1
Downloads
29
Makes
0
Views
447
Reviews
0

Updated at source:

Model information

Category
Electronics
License
Creative Commons — Attribution — Noncommercial

I wanted a way to hold down my keyer, especially since this AME key has exposed parts that make it difficult to support with the other hand. The base allows a passthrough for the cable or installation of an audio jack, and then can be detached from the leg strap plate. I also have a hole in the bottom side of the base plate for a 2.54cm x 3.96mm magnet I found at my local hardware store.

11 Dec Update: 

I might have been a little hasty in publishing. During assembly I found an issue with clearance between the audio plug and the screws on the bottom of the keyer. The file has been updated.

Tags