Nassenheider Inverto replica - turnable decapping device for honeycombs
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Turnable device for decapping honeycombs (replica of "Nassenheider Inverto").
- Ocena
- 5 / 5
- Polubienia
- 29
- Pobrania
- 160
- Wydruki
- 0
- Wyświetlenia
- 2254
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial
Turnable device for decapping honeycombs (replica of "Nassenheider Inverto").
Especially usefull for using a hot air decapping gun in one hand.
Application video original:
You will need:
-) 1 x 2020 aluminium profile type 6 B, length = 377 mm (for austrian "Einheitsmaß" with a length of 370 mm)
-) 2 x 2020 aluminium profile type 6 B, length = 130 mm (for austrian "Einheitsmaß" with a length of 370 mm)
-) 2 x 2020 internal corner brackets type 6 B
-) 2 x 2020 type 6 B M5 hammer nuts + bolts
-) 6 x M4 bolts + nuts
Use the drilling template to drill the four 4 mm holes inside the decapping box (do not scale the pdf when printing, otherwise the dimensions do not match!).
Edit: 08.07.2020: I think it's better to not mount the two short beams on the side of the long one like I did but on the upper surface. It's then easier to change the distance/width of the frame spacers because they are moveable.
Print Settings
Printer:
HEVO RS
Rafts:
No
No
Resolution:
0,3
35
Filament: Extrudr PLA white
Category: Outdoor & Garden