Nassenheider Inverto replica - turnable decapping device for honeycombs
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Turnable device for decapping honeycombs (replica of "Nassenheider Inverto").
- Rating
- 5 / 5
- Likes
- 29
- Downloads
- 159
- Makes
- 0
- Views
- 2,251
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial
Turnable device for decapping honeycombs (replica of "Nassenheider Inverto").
Especially usefull for using a hot air decapping gun in one hand.
Application video original:
You will need:
-) 1 x 2020 aluminium profile type 6 B, length = 377 mm (for austrian "Einheitsmaß" with a length of 370 mm)
-) 2 x 2020 aluminium profile type 6 B, length = 130 mm (for austrian "Einheitsmaß" with a length of 370 mm)
-) 2 x 2020 internal corner brackets type 6 B
-) 2 x 2020 type 6 B M5 hammer nuts + bolts
-) 6 x M4 bolts + nuts
Use the drilling template to drill the four 4 mm holes inside the decapping box (do not scale the pdf when printing, otherwise the dimensions do not match!).
Edit: 08.07.2020: I think it's better to not mount the two short beams on the side of the long one like I did but on the upper surface. It's then easier to change the distance/width of the frame spacers because they are moveable.
Print Settings
Printer:
HEVO RS
Rafts:
No
No
Resolution:
0,3
35
Filament: Extrudr PLA white
Category: Outdoor & Garden