MX Compatible Keycaps Similar to F10 Profile
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Some 1u keycaps I designed in about an hour. They aren't the best but they accomplish the intended purpose.
- Ocena
- 5 / 5
- Polubienia
- 66
- Pobrania
- 368
- Wydruki
- 3
- Wyświetlenia
- 3474
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Print at 0.15mm layer height. Models should be in correct orientation for printing. Tolerance at mounting point is 0.10mm on either side which makes for a snug fit. If your printer isn't very good at dimensional accuracy, you may need to scale up a bit. I plan to add models with different tolerances to negate the need for scaling in such cases.
Currently, I have included one smooth 1u keycap and one homing 1u keycap. The homing keycap has a 8.0mm diameter circle recessed 0.3mm into top of the keycap. This adds just a bit of tactile homing to otherwise difficult to navigate keycaps. I plan to add a 2u POS style keycap. If there is interest, I may attempt other more common keycaps sizes.
Pictured keyboard: Keebio Iris rev4