1 / 2
MX Compatible Keycaps Similar to F10 Profile — image 1
1 / 2

MX Compatible Keycaps Similar to F10 Profile

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Some 1u keycaps I designed in about an hour. They aren't the best but they accomplish the intended purpose.

Rating
5 / 5
Likes
66
Downloads
368
Makes
3
Views
3,474
Reviews
2

Updated at source:

Model information

Category
Computers
License
Creative Commons — Attribution — Noncommercial — Share Alike

Print at 0.15mm layer height. Models should be in correct orientation for printing. Tolerance at mounting point is 0.10mm on either side which makes for a snug fit. If your printer isn't very good at dimensional accuracy, you may need to scale up a bit. I plan to add models with different tolerances to negate the need for scaling in such cases.

Currently, I have included one smooth 1u keycap and one homing 1u keycap. The homing keycap has a 8.0mm diameter circle recessed 0.3mm into top of the keycap. This adds just a bit of tactile homing to otherwise difficult to navigate keycaps. I plan to add a 2u POS style keycap. If there is interest, I may attempt other more common keycaps sizes.

Pictured keyboard: Keebio Iris rev4

Tags