Hotend Spacer CR10 V3
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Made a spacer to accommodate another blower setup (read main)
- Ocena
- 5 / 5
- Polubienia
- 4
- Pobrania
- 77
- Wydruki
- 1
- Wyświetlenia
- 588
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
After purchasing my CR10-V3 I decided I wanted a better blower setup. I found this one and gave it a spin however after attaching it there was little room for error or adjustment when positioning the mount and as a result it created a little pressure which “canted” the mount
https://www.thingiverse.com/thing:4785446.
In turn I created a spacer to push the mount out about 2mm. I have tested it and so far it seems to be working fine using the above blower setup.
I would suggest more than 70% infill (more solid is better) and 3 perimeters with a .15 layer height.
Note: the round section is to be placed downward to help give a little more stress support from the hotend and blower mount.