CREALITY K1 MAX GLASS LID RISER CLIPS
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Riser clips that raise the glass slightly to avoid the glas touching the bowden tube.
- Ocena
- 5 / 5
- Polubienia
- 50
- Pobrania
- 492
- Wydruki
- 2
- Wyświetlenia
- 3742
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A small issue with the K1 &K1 max printers are the bowden tube that leads to the extruder rubbing on the glass lid. This can cause the tube to bend slightly mode and possibly cause more friction for the filament.
These clips will clip onto the metal frame and allow you to raise the class by 2-3mm. I have used 8 clips (2 each side).
The clips are slightly different photos. Slightly wider, Higher wall for the glass and larger tolerance all over.
Warning. These clips do leave the edge of glass visible and therfore could be prone to breaking if you were to hit the edge of toughened glass. Use at your own risk.
If you would like any modifications please message and we can discuss.