V-Core 3.1 Metal XY Joiners X Endstop
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adjustable X endstop for metal XY joiners on the RatRig V-Core 3.1, designed for use with the VZBot CNC Toolhead
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 710
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
This is an adjustable X endstop for the RatRig V-Core 3.1 that is secured to the metal XY joiners by the 2 unused holes on the lefthand xy joiner.
This was specifically designed for use with the VZBot CNC Toolhead, but EVA3/2 should work just fine as well.
BOM
- 2 M3 heat-set inserts
- 2 M3x6 screws
- 2 M5x12 screws
- 2 M5 Nuts
Assembly
Just print both parts, use 2 M3 heat-set inserts for the base part that screws to the xy-joiner, then use 2 M3x6 screws to secure the ‘endstop’ to the base.
Secure the base to the xy-joiner with 2 M5x12 screws and nuts.
Happy printing!