2" Magnetic Exhaust Pipe Mockup System
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix which changes to 2" outside diameter pipe and 8mm x 3mm magnets (or 15mm x 3mm) by request.
- Ocena
- 0 / 5
- Polubienia
- 39
- Pobrania
- 184
- Wydruki
- 0
- Wyświetlenia
- 1181
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Update 12/23/23: Added a 15mm x 3mm magnet version and organized files into folders.
This is a simple system of pieces that use 8mm x 3mm magnets (or 15mm x 3mm) to snap together for mocking up and prototype routing exhaust or other pipe routing. This base design is set up to represent 2" outside diameter pipe, approximately 50.8mm.
In the pictures I have a 1" long straight, 3" long straight, and 30deg sweeps with a radius of 4", 3", 2", and 1.5". Feel free to reach out if you would like another version of a different diameter or special “Y” or “T” fittings. I am happy to make new versions of whatever you need!
They are also a very fun toy because they have a very satisfying click and stay together well enough to hold and move around. They even work well as fridge magnets!
If you need a 1.5" (38mm) version, see the original version here: https://www.printables.com/model/462199-magnetic-exhaust-pipe-mockup-system
By request, here is a 1.75" (44.45mm) version for 18mm x 3mm magnets: https://www.printables.com/model/663383-175-magnetic-exhaust-pipe-mockup-system