1 / 1
Sonnak 2.4 z belt tension wheel w/h m4 hex nut — zdjęcie 1

Sonnak 2.4 z belt tension wheel w/h m4 hex nut

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

swapped the hole in the wheel for an m4 hex nut rather than the t nut

Ocena
5 / 5
Polubienia
2
Pobrania
48
Wydruki
1
Wyświetlenia
293
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

remixed sonnak's z belt tensioner wheel to use a m4 hex nut, as I didn't have any t nuts of that size, but I had a lot of the former from buying a screw kit for mounting my monitor.

 

the hole is 6.8mm at its widest. It's enough to push a nut in with a soldering iron. You may have to up the x/y hole expansion by 0.1 in orca (or its equivalent elsewhere) to get a press fit.

this part isn't taking the brunt of the weight, the tensioner body would be, so you could probably get away with lightning infill.

Tagi