Ender 3 v2 Neo Satsana Magnetic
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hot end shroud for the v2 Neo, based off Scottyujan's 40x20mm fan Satsana remix - with support for round 8x2mm magnets
- Ocena
- 0 / 5
- Polubienia
- 50
- Pobrania
- 226
- Wydruki
- 0
- Wyświetlenia
- 2244
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Patreon - https://patreon.com/CosmicNimbusPrinting
Cults3D - https://cults3d.com/en/users/CosmicNimbus
Hi fellow Ender 3 v2 Neo user !
This was my first remix I embarked upon and is only fitting for it to be my first upload. I tried to remix it to fit my (then) new Ender 3 v2 Neo, as there didn't seem to be a Satsana hotend shroud for the 3v2 Neo. After about a year of modelling and printing, I have revisited this remix to clean up the model and make it better.
I've added 5 holes for magnets, which press fit perfectly on my print. If you print this with finer detail, there is space behind each hole to use some hot glue if needed. 2 of the holes are sunken in to allow for the flat head screws that hold the bracket to the carriage. There are 5 holes for magnets. I only had 3 magnets left but it holds firm !
I printed mine using Chep's Fast settings with 0.28 layer height for Cura. I used tree supports in cura but blocked out the whole ducting area so supports weren't printed inside.
I printed an early version in PLA and used it for about a year printing PETG with minimal warping. But I printed this one in PETG and recommend this.
There are some small defects in the model still, but they don't seem to cause any issues
I have quite a few upgrades on my printer, and would like to make a collection here on Printables. I endeavor to upload my various remixes and models of them soon
Drop me a like/comment if you like my design, and I would love to see your make!
Happy printing <3