Chicken waterer using PET botttle + breather
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Waterer for chickens and other small animals with added breather hole to keep the water at a consistent level.
- Ocena
- 4 / 5
- Polubienia
- 15
- Pobrania
- 169
- Wydruki
- 2
- Wyświetlenia
- 1014
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Pets
- Licencja
- Creative Commons — Attribution — Noncommercial
Thankyou to Murdoc for the original design!
When using the original print, I ended up drilling a hole in the side at the level I wanted the water to reach (to allow a ‘breather’ hole so water will flow when it is below this point). I decided to make my own version with the hole pre-made to ensure a good flow of water.
Bottles that have a rigid shape work best with this design, as it relies on the pressure inside the bottle to keep the water from flowing too much. You may find that using a bottle with weak sides (e.g. normal coke bottle) might allow more water than you expect.
Printed with PLA, 0.2mm Layer Height + 20% Infill