Chicken waterer using PET botttle + breather
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Waterer for chickens and other small animals with added breather hole to keep the water at a consistent level.
- Rating
- 4 / 5
- Likes
- 15
- Downloads
- 169
- Makes
- 2
- Views
- 1,014
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Pets
- License
- Creative Commons — Attribution — Noncommercial
Thankyou to Murdoc for the original design!
When using the original print, I ended up drilling a hole in the side at the level I wanted the water to reach (to allow a ‘breather’ hole so water will flow when it is below this point). I decided to make my own version with the hole pre-made to ensure a good flow of water.
Bottles that have a rigid shape work best with this design, as it relies on the pressure inside the bottle to keep the water from flowing too much. You may find that using a bottle with weak sides (e.g. normal coke bottle) might allow more water than you expect.
Printed with PLA, 0.2mm Layer Height + 20% Infill