X-Carriage MBN12H+BMG
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapted the X-carriage so it can house BMG extruder + motor instead of G5 Still using PP but you can attach extruder…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 122
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Adapted the X-carriage so it can house BMG extruder + motor instead of G5
Still using PP but you can attach extruder directly to BMG if you like.
If you are not using PP, there is a mount point for BLTouch
BLTouch X offset = 0
BLTouch Y offset = -25mm
Print requires support.
I printed in ABS 0.4mm nozzle, 0.20 mm layer, 2x layer separation for support, 10top, 10bottom, 10 perimeters, 50% infill.
Source: https://a360.co/361cvDj
Due to Thingiverse weird behavior, hosted also on MyMiniFactory here: https://www.myminifactory.com/object/3d-print-x-carriage-mbn12h-bmg-121644
Post-Printing
Installation
-
attach your extruder to the precision piezo mount (e.g. part or or similar)
attach now extruder + piezo mount to the x-carriage, rotate the extruder heatbreak fan towards the back of the assembly
attach X-carriage to your MGN12H rail. First fingertighten back 2 screws (the easily accessible ones), then fingertighten the remaining 2 screws using ball end allen key. Finally slide the X-carriage back until your fan barely touches the rail and fully tighten all 4 screws
attach BMG + motor
attach 2 blowers
attach part cooling fan tips ( you can find bunch of them here: https://www.thingiverse.com/thing:4189461/files ) print :)
Category: 3D Printer Parts