1 / 5
Xcarriage modification to attach Mendel extruder to BFB hot end
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
WHY: BFB hot ends are very robust and easily obtainable. BFB even sell them assembled and with various nozzle sizes.…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 93
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- GNU General Public License v2.0
WHY: BFB hot ends are very robust and easily obtainable. BFB even sell them assembled and with various nozzle sizes. They are aluminium+peek+teflon so very strong hence you can use them not only for ABS and PLA but also for HDPE, LDPE, PP, uPVC and some other materials.
WHAT: x-carriage has to be changed (to accommodate for the size of the bfb hot end) and the adapter has to be installed between extruder and xcarriage
Instructions
- print one of each
- assemble xcarriage per manual
- the upper 2 trapped nuts will have to be heat pressed into x-carriage upper
- attach the bfb hot end to the adapter using 2 M5 screws so that "flat" part of the acrylic is to the longer side of the hole so that 2 m3 heads can be secured in the 2 remaining holes
- press the hot end carefully into xcarriage
- screw the extruder to the xcarriage trough the adapter
Category: Other