1 / 5
2020 and 2040 75mm Raised Legs for AM8 Upgrade
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Use it, Spread it, Remix it! This 2020 Attachment adds 75mm tall legs. These legs allow me to get under my printer to…
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 57
- Wydruki
- 0
- Wyświetlenia
- 260
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (16)Powiązane
Use it, Spread it, Remix it!
This 2020 Attachment adds 75mm tall legs.
These legs allow me to get under my printer to keep my work space clean.
Print with legs upside down.
Print Settings
Initial Layer Height: 0.15mm
Layer Height: 0.2mm
Line Width: 0.35mm
Wall Thickness: 1mm
Wall Line Count: 3
Infill: 10% Gyroid
Plate Adhesion: Brim (8mm brim width)
Print Settings
Printer Brand:
Anet
Printer:
A8
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
10% Gyroid
Filament: VSHEN PLA Orange
Category: 3D Printer Parts