Magnetic SD Card Box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A useful holder for your SD cards... With a magnetic lock!
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 40
- Wydruki
- 0
- Wyświetlenia
- 694
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
I made this SD card holder because i wasn't satisfied by the others i observed in the web.
The box can contain 6 SD cards.
For the magnet i used Ø5x2mm magnet, easily findable on Amazon.
For the hinge's pin i used a piece of Ø1,75mm AISI 316, but you can also use a normal piece of iron or copper wire.
I used a little point of epoxy glue in the two terminal of the pin to pervent the leak from his hole.
I Hope you will find this think useful! Sorry for the photos, but i don't know why i can't upload them in the correct orientation :(
Let me know what you think in the comments :)