Electrical clip probe with banana (4mm) connector
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This design is a variation of my spring loaded clip probe adapted for banana (4mm) connectors:…
- Ocena
- 0 / 5
- Polubienia
- 33
- Pobrania
- 131
- Wydruki
- 1
- Wyświetlenia
- 768
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
This design is a variation of my spring loaded clip probe adapted for banana (4mm) connectors: https://www.printables.com/model/664568-electrical-clip-probe-spring-loaded
It uses a piece of wire (0. to 1mm diameter) a M3 8mm screw and a spring (up to 8mm diameter). A pen spring works well.
Follow the illustration in the pictures to bend and install the wire. The twisting with a drill is important as it not only straighten, but also strengthen the wire by work hardening.
I have tested this design with a variety of banana connectors and had no issue but given the diversity of existing models you should check the quality of the electrical connection for yourself.
Category: Electronics