1 / 5
Window holder for Ubiquiti UniFi Protect G4 surveillance camera — zdjęcie 1
1 / 5

Window holder for Ubiquiti UniFi Protect G4 surveillance camera

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Stable window holder with suction cups to attach a Ubiquiti UniFi Protect G4 to the inside of a window.

Ocena
5 / 5
Polubienia
28
Pobrania
126
Wydruki
1
Wyświetlenia
958
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Photo & Video
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Stable window holder with suction cups to attach a Ubiquiti UniFi Protect G4 to the inside of a window.

Print instructions

Prints without the need for support. A pause is required to insert the nuts.

  • Material: PETG
  • Layer height: 0.20mm
  • Nozzle: 0.4mm
  • Perimeters: 3
  • Infill: 15% (Gyroid)

— IMPORTANT — 

To insert the nuts, you need to add a pause (M601) above the nut compartment so these can be inserted and covered. The nuts move freely but will sit tight after the suction cups are screwed in place.

Parts needed

  • 2x M6 nuts
  • 2x suction cups with M6 thread (I got these from Amazon in a package of many)

Installation

  • The camera snaps in place without any screws. Push the top part in first. If needed, slightly bend the print backward.
  • Clean the window and the suction cups with soap or window cleaner before mounting to ensure the camera won't fall.