1 / 5
Window holder for Ubiquiti UniFi Protect G4 surveillance camera — image 1
1 / 5

Window holder for Ubiquiti UniFi Protect G4 surveillance camera

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Stable window holder with suction cups to attach a Ubiquiti UniFi Protect G4 to the inside of a window.

Rating
5 / 5
Likes
28
Downloads
126
Makes
1
Views
958
Reviews
2

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

Stable window holder with suction cups to attach a Ubiquiti UniFi Protect G4 to the inside of a window.

Print instructions

Prints without the need for support. A pause is required to insert the nuts.

  • Material: PETG
  • Layer height: 0.20mm
  • Nozzle: 0.4mm
  • Perimeters: 3
  • Infill: 15% (Gyroid)

— IMPORTANT — 

To insert the nuts, you need to add a pause (M601) above the nut compartment so these can be inserted and covered. The nuts move freely but will sit tight after the suction cups are screwed in place.

Parts needed

  • 2x M6 nuts
  • 2x suction cups with M6 thread (I got these from Amazon in a package of many)

Installation

  • The camera snaps in place without any screws. Push the top part in first. If needed, slightly bend the print backward.
  • Clean the window and the suction cups with soap or window cleaner before mounting to ensure the camera won't fall.