1 / 1
Wuxn WXR Fan Shroud for improved cooling.
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Improved cooling fan shroud for the Wuxn WXR printer. Required for fast printing.
- Ocena
- 5 / 5
- Polubienia
- 8
- Pobrania
- 36
- Wydruki
- 1
- Wyświetlenia
- 280
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
Improved cooling fan shroud for the Wuxn WXR printer for fast printing.
It requires a silicon boot when fan is set to 100% - to protect the hotend from over-cooling. https://www.sliceengineering.com/products/copperhead-silicone-boot
Fan speed for “go to” print settings can be reduced to 50% or less and dialed up as needed for faster print speeds. Finally plenty of overhead cooling to play with. ;)