Vulpes Majora Unibody Case w/ Tilt
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a solid 3-piece design for the Vulpes Majora
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 35
- Wydruki
- 0
- Wyświetlenia
- 357
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a gasket mount design for the Vulpes Majora in 6col and 5col format. It is configured for the PER56 plus trackball setup. There are only three major pieces to print, not including the trackball housing, encoder ring, 5-way switch hats, and 3-way rockers.
There are two different bottom pieces you can choose from. One is flat and the other has a 7 degree tilt to the base with extra room for adding weights for a more premium sound and feel.
The top and bottom fasten with M2 heatset inserts. The dimensions for the heatset insert holes are: 3.4mm diameter opening, that tapers down to 2.8mm at the base of the hole, which is 3.8mm deep. Any insert with these approximate dimensions will work.
M2 screws: 8mm - 10mm (14 required)
Inserts: https://www.amazon.com/gp/product/B08T7NDPQC/ref=ox_sc_act_title_1?smid=A17NWEQILMUSOP&psc=1
Gasket Foam: https://www.amazon.com/Insulation-Neoprene-Adhesive-Multi-Function-Soundproof/dp/B08R9LR1H4/
Rubber feet: https://www.amazon.com/gp/product/B073W1B3G1/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
Weights: https://www.amazon.com/gp/product/B06XDG1JJH
Magnets (3mm x 2mm): https://www.amazon.com/Magnets-Refrigerator-Neodymium-Whiteboard-Kitchen/dp/B0CCXZ8H5W/