Voron Galileo PG7 mount for EBB2209/SB2240
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
PGN Canbus mount to allow use with stock limit switches and Z chain
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 181
- Wydruki
- 0
- Wyświetlenia
- 1544
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is for the Voron 2.4 with the BTT EBB 2240 and 2209 toolboards while using the Galileo 2 Extruder.
I downloaded the PG7 holder by HartK and installed it when I installed my Galileo 2.
Problem was that I could no longer home my printer as the Hartk mount pushed the PGN umbilical too far back and it interfered with my Z axis chain and the other end of my umbilical mount designed by Minsekt (tied into the AB motor mounts in the back https://mods.vorondesign.com/detail/ho9WEyf6msbGKhTbtM59mQ)
So I modified his design to use the mounts he made however I moved the PGN7 Location back to the stock location originally used in this mod here by CustomCreations (https://www.printables.com/model/463220-voron-cw2-stealthburner-ebb-sb2240-pg7-umbilical-m) which allows the machine to home properly without custom homing sequences or modifying switch locations.
It isn't the prettiest mount but something I whipped up real fast to get my printer running again. Feel free to modify all you want.