Liczymy pasujące modele…
This mount raises the PG7 so you don't have a large “S” loop when using the smaller mounts. This design was provided by Nyxcode on Voron discord. Enjoy
Installing a 🥰 BTT SB2209 on my Voron Stealthburner/CW2, I wasn't satisfied with the available umbilical solutions. So I started from scratch, explored different approaches, and designed this Cable Bridge PLUS. It ended up not that…
A purpose build XT30 2+2 plug designed for the 🥰 BTT SB2209 / SB2240 toolhead boards. Built with a minimal footprint to keep your cable routing clean and uncluttered. Companion Model: Use the Cable Bridge PLUS to form a sleek and ultra…
The original models of the EBB boards seem to be inaccurate to the as-delivered boards. This results in an incorrect assembly and bad parts. I've tweaked the EBB models based on measurements and sample prints so that it assembles without…
Version 2 This variation includes slots for zipties. This is particularly usefull If you are also routing the extruder cables through the umbilical instead of using the driver on your SB2209/SB2240. Replaces the Stealthburner cable anchor…
Remixed together Alexander's and BTT's Cable door for the voron stealthburner to work with the SB2209 / SB2240 If you want to use a controlled 3rd fan to cool your EBB SB2209/2240 use HyperToxic's guide to add that 3rd fan, pinout on the…
V1.1 - UPDATE: As @Hornet331_645553 noticed and mentioned, there was a slight misalignment with the lower sensor. I have implemented a fix for it as well as added slightly more clearance for the upper D2F switch, hopefully making it…
Remixed version of @MikeF PUG Mount for BTT 2209/2240 - now it fits the bulkier and longer plug that BTT ships with newer boards.
A 2 parts mount for people using BTT SB2240/SB2209 CAN Bus board that are also using PG7 for strain relief. I didn't want a bend in my cable, so I made this from scratch. Note: I do not use a cable cover (didn't want extra weight) so the…
Note: This is for the original CAN cable that BTT shipped, with a small rectangular plug. They've started shipping a different cable with a different plug shape, which this STL is not compatible with. The existing PUG mount doesn't work…
This is for the original version of the CW2 main body, won't fit BTTs variant.
Printed with standard Voron settings the cable tie is also needed to secure the cable to the mount.
Different take on CANbus cable strain relief using PG7 Gland. Intended for newer BTT Toolhead boards with thicker connector. For those who want lower and centered mount. Although routing the cable is a bit finicky. Added cutout version,…
Remix to add support for the connector as well.
This made an incredible difference on my 2240. Now you can hear the hammer when firing. I haven't noticed any negatives on accuracy and the FPS is unaffected. If it does not fit snuggly enough, use glue ;) Make sure you get clean…
A remix of JaredC's Galileo 2 Cable Door and Alexander's SB2040 CW2 fan cover door I use HyperToxic's wiring schematic to have my CAN PCB Fan turn on when the extruder is used, Info is in his github…
Maintain a unique style of Stealthburner. No screws reguired.
This model has the followinnf features: CPAP mount (2 heat inserts on StealthBurner + CPAP connector) Nozzle Cam support with PCB mount on the right side of StealthBurner face + special cut to handle nozzle cam FPC BTT KNOMI BTT CanBus…
Add 3007 fan and ventilation for your can board. I found other hex-holed remixes weak at the door edges and the holes messy to print on my non-voron printer in ABS. This is remixed to retain some strength instead of going super mesh holed.
Modified cable cover to hold a 3010 or 3007 Fan. One with a grill, one without.
I saw my EBB toolhead driver was getting up around 90C! So something had to be done ASAP! I took BTT's EBB door and put the classic Hexagon “Bestagon” on it to make vents. One is just vents the other has mounts for heatset inserts and…
This is an updated version of the latest step files from BigTreeTech to fit the latest step files from Voron. The rest of the files needed to assembly the Voron Clockwork2 for the Voron Stealthburner can be found on the Voron Github.
This is the same as this, but with two added rails; https://www.printables.com/model/326303-crosman-2240-picatinny-for-bipod-or-laser CAD file included
Found the 3m0 nozzle camera cpap. i didnt need the camera part. also modified tube to be centered removed hex.
Front face for Stealthburner incorporating the following: BTT KNOMI Rapidio UHF 3DO Nozzle Camera LGX Lite SB 2209/2240 Remix of Stealthburner + KNOMI + 3DO Nozzle Camera + Rapido UHF by Baze & Stealthburner /LGX Lite/EBB 2209 by…
This is an updated version of the latest step files from BigTreeTech to fit the latest step files from Voron. The rest of the files needed to assembly the Voron Clockwork2 for the Voron Stealthburner can be found on the Voron Github and…
Print using standard Voron recommended settings for toolhead components.
This CAN bus cable retention clip is a reworked version of the v1.1 retention clip from the official BigTreeTech GitHub. I created it after finding that the original version interfered with the USB-C port and my extruder cables in a…
This is a mod of the cable cover to add a 25x25x7mm cooling fan to cool the toolhead board. GitHub Link Updated 2023/12/12 per comments to improve printing. Thank you @indi8six_1180574 & @jetcat_560589 Updated 2024/4/4 to comply with G2E…
Use 2 M3x5 set screws to fasten. Includes two versions, one with the NEMESIS text as on picture and one with no text
Use two M3x10 Caphead screws and two nyloc nuts I had problems printing this with Arachne enabled and my 0.4 nozzle, the perimeters didn't fuse, so I had to use classic perimeter generator.
Cable clamp with voron logo, useful when using umbilical mod. Hole for ptfe 4mm, cable hole ~5mm
I'm running multiple tools and found that the BTT provided cables were unshielded and interfering with each other when rubbing against one another, causing bus communications to freak out. I made new cabling with some LDO FEP cable, but…
This is a vented version of the current BTT Cable Door for EBB SB2240. I could not find any other designs with the new version that are vented, plus I think the angled vents match the Voron aesthetic well. Original BTT files can be found…
same hardware as Nyx's linked below, CNLinko quick detach PG7 https://www.amazon.com/gp/product/B087MXNC7W/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1
Really just adding Knomi 2 support to @seage's work and remixes. You will need to download the CPAP connector from Seage's model. Will need to download the Knomi 2 mounting plate from the Knomi 2 github repo: found here:…
Fit M12 gland from aliexpress. Print thread down with organic supports
With the release of V1.2 of the EBB toolhead PCB, the included main body is no longer compatible with V1.0 or V1.1 modded cable covers. This is a simplistic V1.2 compatible cable cover for use with a 30x30x10 fan. Personally I'm running a…
I needed a simple cable route/mount for the included cable given with SB2209 and SB2240 kits. Just push the cable in and screw in just like the original design.
Different take on CANbus cable strain relief using PG7 Gland. Intended for newer BTT Toolhead boards with thicker connector. For those who want lower and centered mount with a cutout for the cable/screw in portion. Make sure to route the…
Perfect model to print for having a lower temperature near the SB2209 or SB2240 to make them last longer. It also has hexes!!!!! In the near future will be out a model that uses also a small fan to keep the electronics even more frosty!
This is for the Voron 2.4 with the BTT EBB 2240 and 2209 toolboards while using the Galileo 2 Extruder. I downloaded the PG7 holder by HartK and installed it when I installed my Galileo 2. Problem was that I could no longer home my…
I just added a coutout hole in order to not have to disable the whole cable to remove it. The rigidity is good. I've been using it for more than a month now. Printed with Voron settings.
In the original model the lower switch recess was slightly to shallow, the switch was standing out.
Quick and dirty SB2209/2240 CAN bus umbilical mounting post for Galileo 2 Extruder. Use a M3x50 SHCS to mount the post instead of the cable chain holder, then fixate the umbilical with a zip tie. Print without support to keep the cavity…
I remixed the LGX lite mount because I felt the others are incorrect or just make things line up weird.
The original SB2209 misalignment protector didn't work for me with G2E (using https://github.com/IRTrail/G2E-Filametrix ). The raised part next to the pins doesn't fit inside the opening the G2E body leaves. This version flattens the part…
Print it standing up, NOT as I did in my picture, that was just me being lazy so I could post a picture of it printed. -Stupid I know ;) Hardware needed: M3X3 Set screw - 2PCS
Single side and triple picatinny mount for Crosman 1322 and 2240.
Avoid tangling the umbilical cable with the Z chain ! This mod is intended to be used with this one : https://www.printables.com/fr/model/363657-voron-v24-trident-rear-umbilical Print the cable gland twice in TPU and use 3 zipties to keep…
Printed with PETG with supports on the bottom. I put a ventilation slot on the bottom.
I wanted to use the wire strain relief instead of the gland ones, so I extended BTTs cable bridge to work with this stealthburner modification. Compatible with BTTs CANBUS cable clip with wire strain relief here:…
BTT modified the Stealthburner Cable Cover for use with their EBB 2240_2209 Board. My board gets 85°C hot when printing. Therefore I took the redesigned cover from BTT and the remixed version from Sven Kah and made a remix to fit the…
-this is the deeper/wider version of the cover ~48mm deep (front to back if you're looking @ front of stealthburner) -I use freecad, I've included that file, the STEP file and the STL for anyone that wants to keep modifying -if you're…
CAN Cable holder for a PG7 strain relief compatible for the Stealthburner toolhead with the Galileo2 extruder and Big Tree Tech SB2240 / SB2209
I added the 3DO pcb holder to the latest files from BigTreeTech for the EBB SB2204/SB2240 Clockwork2 main body and pcb cover.
my Brain Slug version works fine and EBB is around 36°C that really nice.. Fan is mounted with heat inserts for M2.5 and M2.5 screws with 8-12mm length Every time I look at it I think about this https://futurama.fandom.com/wiki/Brain_Slug
A hardness specimen that is able to be used with the ASTM D2240 Hardness testing standard with a Shore D Durometer.
Download the updated version below: Filament runout sensor for Stealthburner with EBB SB2209
This design requires a different latch ( https://github.com/EtteGit/EnragedRabbitProject/blob/main/usermods/CW2_with_ECAS_and_optional_sensor/STL/%5Ba%5D_latch.stl ) and a different cover door like (…
Remixed from aju3169's model to add standard hotend sizes. Also decided to go with the vent option, lol because it looks better. This will work with the kit / file that garteh.ky created. Updates* 080123 Simplified the Model to help with…
you may need to sand the peg
Original model from BTT repo https://github.com/bigtreetech/EBB I have been looking for this design but have no luck. So i changed original , make some holes. Easy to print and completely fit with other parts. Print Settings Printer…
Modified to work with 6.3mm balls i got from an old bike bearing. The original description also says that it's not compatible with original hotend mounts, but that's what I'm using and it works so idk.
Evinrude Johnson 0322405 Electric Choke - CLEVIS, Plunger to lever Purchase at https://www.ebay.com/itm/133667880716
More part numbers and CAD formats on www.traceparts.com/goto?Product=30-13122017-111782
Updated - CW2 main body - ebb_sb2209/2240 with filament_sensor to reflect the lastest version.
This model is compatible with the lego system.
Fits tightly around the barrel of a Crosman 2240. Keeps it stable so you can dial in your sights.
When the Neopixel LEDs on the toolhead are on, the temperature of the EBB 2240 PCB rises to 85°C. For this reason, I modified the 'Cable cover EBB' model by BigTreeTech to allow the installation of a 2507 fan. My fan comes with M3 screws;…
Cable holder for SB2209/2240
This model will support the EBB 2240/2209 PCB when it is mounted in the Voron Stealth Burner. Use Voron Design Recommended Print Settings.
Hello everyone, I had some spare 25x10mm 4-pin fans from Bambulab, and I thought it was a shame to throw them away since they were still functional. With a bit of soldering and some reverse engineering, I managed to mount them on the…
Swiss3DC hotends use dual heater with rather big connectors. To have enough space below the cover, the fan is moved a little bit
This design bring you the capability for a Voron Trident with Galileo2 and EBB SB2209/2240 to have a chain mount and a relief connector for the CAN Cable. Printing information No need support but ... ABS or ABS-CF 5 walls & top/button 40%…
Modified parts from @stucamp on Github . PG7 gland mounts for the Voron Switchwire X-axis. To install I recommend using a de-pinning tool for the molex microfit connector. More info is in the original Github repo, but the umbilical will…
Part of the Marantz 74 SD635 with 2 x cassette drawer. Also appears in Marantz 75 DC1010 and 75 DC1020 European part nr: 4822 403 70983 Part nr for USA/Japan/Far East: 446T002240 In the manual PDF: Part 117C, in the middle of page 17…
i love the 2240 and the 22XX family. so I made this for a large Minifigure I printed
Club Car Sepex-Motors (Teilenr. 102240102) Klemmbrett
i love the 2240 and the 22XX family. so I made this for a large Minifigure I printed
This design bring you the capability for a Voron Trident with Galileo2 and EBB SB2209/2240 to have a chain mount and a relief connector for the CAN Cable. Printing information No need support but ... ABS or ABS-CF 5 walls & top/button 40%…
Different take on CANbus cable strain relief using PG7 Gland. Intended for newer BTT Toolhead boards with thicker connector. For those who want lower and centered mount. Although routing the cable is a bit finicky. Added cutout version,…
Required Hardware (2) 6-32 x 1/2" Screws, (2) 6-32 Nuts (1) 8-32 x 2" Screw, (1) 8-32 Lock Nut, (2) 8-32 Flat Washer
