EBB SB2240 SB2209 V1.2 Cable Cover Fan
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simplistic EBB SB2240 SB2209 V1.2 Cable Cover for use with a 30x30x10 fan.
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 194
- Wydruki
- 0
- Wyświetlenia
- 1128
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution
With the release of V1.2 of the EBB toolhead PCB, the included main body is no longer compatible with V1.0 or V1.1 modded cable covers.
This is a simplistic V1.2 compatible cable cover for use with a 30x30x10 fan.
Personally I'm running a 12v fan, stealing a 5v pin (there's plenty) on the tool board, making it completely silent. You can obviously also use a 5v fan for more speed / cooling cover.
My temps with the fan on are:
- Chamber: 55°C
- EBB NTC: 68°C
Any “high temp” filament such as ABS/ASA should work (I used Prusament ASA)
Can be printed without supports if you have enough chamber temp to run your part cooling fan on medium. Otherwise I'd recommend tree supports.
BOM:
- 2-4x M3 threaded insert
- 2-4x M3 16mm