Screw Capture Plate Add-On for MMU2S
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A 27 minute solution to stop from losing the precious screws and springs. Newest version has side holes for viewing.
- Ocena
- 4,889 / 5
- Polubienia
- 33
- Pobrania
- 169
- Wydruki
- 4
- Wyświetlenia
- 1586
- Oceny
- 9
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
I was at step 12 of Prusa Knowledge Base | 6. Electronics and MMU2S unit assembly (prusa3d.com) and I had the spring disappear somewhere in my room (there is no spare in the kit). I want to help others from suffering the same fate. I made a capture plate that will hold the screw and spring from coming out the top and also would not stop the screw from moving its full travel distance. I used jkzmath's Prusa i3 MK3S MMU2S SolidWorks Assembly (with STEP) by jzkmath - Thingiverse as reference for the MMU2S plastic parts. It would be better in the PRUSA Orange.
Material used: PETG Anthracite Grey PRM-PETG-ANT-1000
Update 2021 December 28 - Thanks to a commenters suggestion. I have made side windows so the screw/spring depth is visible.