Truck-LKW (Nostalgie-Truck)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is the 3D-Printed version of the Nostalgie-Truck.
- Ocena
- 0 / 5
- Polubienia
- 49
- Pobrania
- 232
- Wydruki
- 0
- Wyświetlenia
- 3346
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution — Share Alike
In school we made the Nostalgie-Truck out of Iron. I diceded to 3D-print it.
The original one is this: https://www.christiani.de/ausbildung/metall/ausbildungsinhalte/projektarbeit/3-lehrjahr/projektarbeit-nostalgie-truck.html
I designed some parts other then the original one, because the original one is made out of metall and some parts don't hold because they are to thin for 3D-Printing. But 95% of the truck is original.
Some parts I don't printed, because I made it like we made it in school.I
I'f also made a list with the srews and other you need for the assembly.
I printed most parts in PLA/PLA-Silk, some parts i made in PETG, I wrote it to the notes of the parts.
The biggest part is the base_plate, it is 277.5 mm. So you need minium a buildplate of 280 mm lenght and at least 150 mm width.
I got also for you 3 drawings, from the front, rear and a big side drawing.
For questions just write me here on Printables or on Instagram: @m.pohl07