TGC Slabs stand holder 3+3 (6 cards)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Print your own TGC Slabs stand (initially made for Hermicraft Alt-Art collection). Version 3+3 slots (6 cards).
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 147
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Print your own TGC Slabs stand (initially made for Hermicraft Alt-Art collection).
Version 3+3 slots (6 cards).
There is two sub-release available :
- Stand-3+3-LIGHT → With a depth of 6.80mm in each slots
- Stand-3+3-LIGHT-TIGHTER → With a depth of 6.40mm in each slots
You'll also find some “Spacer”, only needed if the card move too much in its slot (you can also use some pieces of paper).
I also included two "Test print" models to check the result with only one slot :
Stand-TestPrint-LIGHT → With a depth of 6.80mm for the slot
Stand-TestPrint-LIGHT-TIGHTER → With a depth of 6.40mm for the slot
Print Settings
- Printer brand:
Creality
- Printer:
CR10S PRO
- Rafts:
Doesn't Matter
- Supports:
No
- Resolution:
0.20mm
- Infill:
20%
- Filament brand:
NA
- Filament material:
PLA