Cute desk trash can 10x11.5cm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A little trash bin for your desk to collect cutoffs from arts & crafts etc.
- Ocena
- 0 / 5
- Polubienia
- 32
- Pobrania
- 196
- Wydruki
- 0
- Wyświetlenia
- 578
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial
My wife asked me for a little trash can for her desk to collect scraps from cross-stitching and model-making.
Overall dimensions:
Height: 11.4cm(4.5in) without lid, 15.4cm(6in) with lid.
Diameter: 10cm(4in) at top, 7.6cm(3in) at base.
Designed with 1.2mm thick walls for 0.25mm layer height and printed successfully on a Prusa i3Mk3S+ with a 0.4mm nozzle and 0.6mm extrusion width in Fiberlogy pastel blue Easy-PLA.
For the lid, place supports only under the inner circular face, not the ring on the outside (which sits on the lip of the bin) or on the inside of the cone (unless you want to I guess). I also used adaptive layer heights to smooth out the shallow angled top surfaces.
The design is reasonably parametric if you have fusion 360 and would like to change the dimensions.