1 / 2
Yeti 20oz Tumbler Holder (23mm clip opening)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A 23mm (7/8in) mounting clip for the Yeti Rambler 20oz Tumbler.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 38
- Wydruki
- 0
- Wyświetlenia
- 224
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a holder for the Yeti Rambler 20oz Tumbler.
The mounting clip is designed for a board thickness of 23mm.
Printing Tips
- I used white PLA, 0.4mm nozzle, 0.2mm layers
- Ring:
- Print top surface on-plate if you prefer that surface finish
- Mount:
- Print on its side, so layer-lines are structurally reinforcing for the clip
- Use 3-perimeters for structure
Assembly Instructions
- There is a small circle-deboss indicating the “bottom” of the ring, as the inner surface is slightly tapered.
- Press-fit the ring into the mount. The pegs should go nearly-flush to the other side.
- If it's tight, using percussive force didn't seem to harm…