1 / 2
Yeti 20oz Tumbler Holder (23mm clip opening) — image 1
1 / 2

Yeti 20oz Tumbler Holder (23mm clip opening)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A 23mm (7/8in) mounting clip for the Yeti Rambler 20oz Tumbler.

Rating
0 / 5
Likes
7
Downloads
38
Makes
0
Views
224
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

This is a holder for the Yeti Rambler 20oz Tumbler.

The mounting clip is designed for a board thickness of 23mm. 

Printing Tips

  • I used white PLA, 0.4mm nozzle, 0.2mm layers
  • Ring:
    • Print top surface on-plate if you prefer that surface finish 
  • Mount:
    • Print on its side, so layer-lines are structurally reinforcing for the clip
    • Use 3-perimeters for structure

Assembly Instructions

  • There is a small circle-deboss indicating the “bottom” of the ring, as the inner surface is slightly tapered.
  • Press-fit the ring into the mount. The pegs should go nearly-flush to the other side.
    • If it's tight, using percussive force didn't seem to harm…

Tags