1 / 2
Window roller striker / Gache de galet
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
It was hard to find the name of this part, but this is used to close sliding glass doors.
I included the FreeCAD source file for you to adapt it to your needs. This was one of my first attemps using FreeCAD, so this is not pretty to look at.
Print Settings
Printer:
JGAurora A1
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0,2 mm
Infill:
20%
Filament:
JGAurora PLAWhite
Notes:
0,2 mm is enough
20% infill gyroid
4 perimeters
Use brim if your adhesion is not perfect.
Use support with 2 layers between end of support and your part to make it easier to remove.
Category: Replacement Parts