Woodturning- Crown Revolution Sandpaper adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Useful for sanding deep hollowforms. Works with velcro 50mm sanding disks.
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 55
- Wydruki
- 0
- Wyświetlenia
- 331
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
I needed to sand the inside of a narrow but deep woodturned part (for a “Weizenholz”). It is very dangerous to sand the inside by hand, and you can't reach the bottom anyways.
This is a adapter for the Crown Revolution tool (I have the midi version, but it should fit all variants), it just screws in place with the standard hardware. You can tilt it 180°. I used some self-adhesive hook-and-loop to stick the 50mm sanding disks to the surface. The disks will overhang on all edges, so you can also sand into corners etc.
Prints with support, PLA and many perimeters worked absolutely fine.