Woodturning- Crown Revolution Sandpaper adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Useful for sanding deep hollowforms. Works with velcro 50mm sanding disks.
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 55
- Makes
- 0
- Views
- 331
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
I needed to sand the inside of a narrow but deep woodturned part (for a “Weizenholz”). It is very dangerous to sand the inside by hand, and you can't reach the bottom anyways.
This is a adapter for the Crown Revolution tool (I have the midi version, but it should fit all variants), it just screws in place with the standard hardware. You can tilt it 180°. I used some self-adhesive hook-and-loop to stick the 50mm sanding disks to the surface. The disks will overhang on all edges, so you can also sand into corners etc.
Prints with support, PLA and many perimeters worked absolutely fine.