Metabo FM 500-6 vacuum adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An vacuum adapter for your Metabo FM 500-6 ___________________ Un adaptateur aspirateur pour votre Metabo FM 500-6
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 87
- Wydruki
- 0
- Wyświetlenia
- 554
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Here's a simple but functional adapter to work without dust everywhere!
This allows you to use a standard 35mm vacuum pipe with your Metabo FM 500-6
It will work either when no guide is used or when the lateral guide is in use as seen in the pictures.
Pay attention, it will NOT WORK with the roller guide. (I'll maybe make another version for that if there are requests for this feature.)
Printer in PLA with:
-3 perimeters
-25% gyroid infill
Rest is standard settings
You will need to support the loop, some organic supports works wonders! (see pictures)
The adapter is featured in this video at around 9:00 (in french):
_____________________________________________
Voici un adaptateur simple et efficace pour travailler sans poussière partout!
Il vous permet d'utiliser un tuyau d'aspirateur standard de 35mm avec votre Metabo FM 500-6
Cela fonctionnera à la fois lorsqu'aucun guide n'est utilisé, ou lorsque le guide latéral est en place comme on le voit sur les photos.
Attention, cela NE FONCTIONNE PAS avec le guide à rouleaux. (Je réaliserais peut-être une autre version si il y a des demandes pour cette fonction)
Imprimé en PLA avec:
-3 périmètres
-25% de remplissage gyroide
Le reste est standard
Il faudra ajouter des supports pour la boucle, les supports organiques marchent super! (voir photos)
L'adaptateur se retrouve dans cette vidéo vers les 9:00: