1 / 6
Vianočný držiak na servitky - XMAS napkins holder — zdjęcie 1
1 / 6

Vianočný držiak na servitky - XMAS napkins holder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Vianočný dvojfarebný držiak na servitky. (alebo aj jednofarebný) - Christmas two-color napkin holder. (or even plain)

Ocena
5 / 5
Polubienia
32
Pobrania
168
Wydruki
1
Wyświetlenia
623
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Aby mal držiak peknú texturu z pohľadovej strany rozrezal som ho v sliceri na polovicu s kolíkmi pre správne poskladanie a vytlačil som ho na smooth plate. Možno bude potrebné trochu očistiť vytlačené kolíčky alebo trošku zväčšiť dierku. Ja som ich zväčšil s vrtakom d=3mm. S troškou lepidla to bude držať na veky.
Priložil som aj gcody subory pre dvojfarebnu aj jednofarebnu tlač.

Ak sa ti model páči klikni na srdiečko a keď ho vytlačíš ohodnoť hviezdičkami a prilož fotku. Ďakujem.

 

In order for the holder to have a nice texture from the viewing side, I cut it in half in a slicer with pins for correct assembly and printed it on a smooth plate. It may be necessary to clean the printed pins a little or enlarge the hole a little. I enlarged them with a d=3mm drill. With a little glue it will last forever.
I have also attached the gcode files for two-color and one-color printing.

If you like the model, click on the heart and when you print it, rate it with stars and attach a photo. Well thank you.

Tagi