Vianočný držiak na servitky - XMAS napkins holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Vianočný dvojfarebný držiak na servitky. (alebo aj jednofarebný) - Christmas two-color napkin holder. (or even plain)
- Rating
- 5 / 5
- Likes
- 32
- Downloads
- 168
- Makes
- 1
- Views
- 623
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Winter & Christmas & New Year's
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Aby mal držiak peknú texturu z pohľadovej strany rozrezal som ho v sliceri na polovicu s kolíkmi pre správne poskladanie a vytlačil som ho na smooth plate. Možno bude potrebné trochu očistiť vytlačené kolíčky alebo trošku zväčšiť dierku. Ja som ich zväčšil s vrtakom d=3mm. S troškou lepidla to bude držať na veky.
Priložil som aj gcody subory pre dvojfarebnu aj jednofarebnu tlač.
Ak sa ti model páči klikni na srdiečko a keď ho vytlačíš ohodnoť hviezdičkami a prilož fotku. Ďakujem.
In order for the holder to have a nice texture from the viewing side, I cut it in half in a slicer with pins for correct assembly and printed it on a smooth plate. It may be necessary to clean the printed pins a little or enlarge the hole a little. I enlarged them with a d=3mm drill. With a little glue it will last forever.
I have also attached the gcode files for two-color and one-color printing.
If you like the model, click on the heart and when you print it, rate it with stars and attach a photo. Well thank you.