Parametric Cable Organiser
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A cable organiser that can be customised to fit your cables exactly
- Ocena
- 4,833 / 5
- Polubienia
- 2091
- Pobrania
- 7029
- Wydruki
- 93
- Wyświetlenia
- 21 451
- Oceny
- 72
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
Inspired by https://www.printables.com/model/122378-cable-organizer-cable-clip
I liked this design but:
- I want to organise larger cables (e.g HDMI, mains leads)
- I have cables of different lengths
- I want the clip to stay with the cable when unwound (so I don't lose it)
I designed this from scratch in OpenScad, based on the design linked above.
This is a parameterised model. You can choose:
- the cable diameter you have
- how many loops of cable you are trying to hold
- the height of the clip
- the overall width
- if you want a 'clip' to attach to the cable when unwound
- a modified design if you are using flex filament
With this you can now get a customised clip for each cable, that fits it perfectly.
There is also a checkbox if you want to used TPU/TPE or any flexible filament. In this case the thickness is increased and the cable gap is reduced. Uncheck this if you are using PLA / PETG.
To use, open the .scad file in OpenScad. Ensure the customizer is showing (menu → Windows → Customizer), then enter the measurements for your cable.
There are limits when you increase the cable size/loops; if you get an error, increase the width, as there needs to be enough width to fit all loops.
This prints very easy on its side, no support needed.