Micromake Effector V2 (Added top plate)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
UPDATE 10/1/2016 Sorry this took forever to upload the top effector plate. I lost the solidworks part file. you can…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 98
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
UPDATE 10/1/2016
Sorry this took forever to upload the top effector plate. I lost the solidworks part file. you can just the stock side clamp, so I can only submit the .stl. the file is modifiable to make it work, but it is a little short. Feel free to do what you want to with it. I may revisit this whole project later. From what I can tell this whole effector assembly is not the greatest setup. its crap in my opinion. I am going to design another effector with less side force during bed calibration.
Made a Micromakes Effector with the bed leveling. Its the 2nd rough draft, Im sure it will need some tweaking. But its close. my buddy printed it, that is when i found the mistake. If you print ABS you may want to upscale .07-1.0% to allow for shrinkage. I have 2 more files to upload for this. I will get those up ASAP.
(UPDATE, THIS MODEL IS REVISED, IT SHOULD BE USABLE NOW)
Print Settings
Printer:
Micromake ValueHobby special!!!
Rafts:
No
Supports:
Doesn't Matter
Resolution:
your choosing.
Category: 3D Printing