1 / 1
Honeycomb Storage Wall (HSW) Tork Craft hex screwdriver holder
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Honeycomb Storage Wall (HSW) Tork Craft hex screwdriver holder
- Ocena
- 5 / 5
- Polubienia
- 29
- Pobrania
- 232
- Wydruki
- 1
- Wyświetlenia
- 885
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (1)Kolekcje (82)Powiązane
- Will hold any screwdrivers that measure less than 16mm (diameter) in the thin section where it hangs.
- Requires 2 empty inserts to be printed.
- There are 2 versions: one with a slight angle inwards, to prevent the driver from falling out, and a flat one that will have a better looking top surface.
- Obviously requires a storage wall: https://www.printables.com/model/152592-honeycomb-storage-wall