1 / 1
Honeycomb Storage Wall (HSW) Tork Craft hex screwdriver holder
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Honeycomb Storage Wall (HSW) Tork Craft hex screwdriver holder
- Rating
- 5 / 5
- Likes
- 29
- Downloads
- 232
- Makes
- 1
- Views
- 885
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
- Will hold any screwdrivers that measure less than 16mm (diameter) in the thin section where it hangs.
- Requires 2 empty inserts to be printed.
- There are 2 versions: one with a slight angle inwards, to prevent the driver from falling out, and a flat one that will have a better looking top surface.
- Obviously requires a storage wall: https://www.printables.com/model/152592-honeycomb-storage-wall