QaDFC - Quick and Dirty Filament Cleaner
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Yet another simple Filament cleaner with magnetic fixation
- Ocena
- 5 / 5
- Polubienia
- 59
- Pobrania
- 250
- Wydruki
- 8
- Wyświetlenia
- 1444
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
Description:
Yet another simple Filament cleaner, that snaps together with four 6x3mm magnets.
Nothing special, but i got somewhat annoyed by my current hinged one, when switching through filaments in quick succession.
Of course i could have searched for some existing solution, but wheres the fun in that?
Also i needed a use case for those magnets anyway. ;-) So i “threw” this together and printed it all in all in under 1.5hrs - hence the "QaD" nickname.
Can also be used for oiling in case some material likes it.
Fits to a PTFE Tube on one side.
If interested, i'll add one with PTFE mounts on both sides.
Printing:
Just print with 0.2mm Profiles
Set Perimeters to 3
Top/Bottom Layers 5
Post Processing:
If needed give it a slice with a file on the contacting surfaces
Insert four magnets on the corners, and make sure the orientation is correct.
Mine did fit snuggly tight, but i placed a small drop of superglue, just in case.
Cut some Sponge or Makeup pad into two pieces of 15*30*~3,5mm, and trim two oposite corners, where the magnets are.
Done