QaDFC - Quick and Dirty Filament Cleaner
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Yet another simple Filament cleaner with magnetic fixation
- Rating
- 5 / 5
- Likes
- 59
- Downloads
- 250
- Makes
- 8
- Views
- 1,444
- Reviews
- 6
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
Description:
Yet another simple Filament cleaner, that snaps together with four 6x3mm magnets.
Nothing special, but i got somewhat annoyed by my current hinged one, when switching through filaments in quick succession.
Of course i could have searched for some existing solution, but wheres the fun in that?
Also i needed a use case for those magnets anyway. ;-) So i “threw” this together and printed it all in all in under 1.5hrs - hence the "QaD" nickname.
Can also be used for oiling in case some material likes it.
Fits to a PTFE Tube on one side.
If interested, i'll add one with PTFE mounts on both sides.
Printing:
Just print with 0.2mm Profiles
Set Perimeters to 3
Top/Bottom Layers 5
Post Processing:
If needed give it a slice with a file on the contacting surfaces
Insert four magnets on the corners, and make sure the orientation is correct.
Mine did fit snuggly tight, but i placed a small drop of superglue, just in case.
Cut some Sponge or Makeup pad into two pieces of 15*30*~3,5mm, and trim two oposite corners, where the magnets are.
Done