M6 Allen Thumb Screw Head (DIN 912 / ISO 4762)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A 2cm diameter thumbscrew cap for an M6 Allen/INBUS Bolt. Just align the bolt head with the cap and push it in firmly.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 160
- Wydruki
- 0
- Wyświetlenia
- 550
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution
About
A very simple but effective thumb screw head/cap, intended to be put on top of an Allen/Inbus M6 bolt (DIN 912 / ISO 4762). I use this for mounting various things like DIN rails and other tools. The outside is slightly faceted for more grip, the inside has a hex protrusion for insertion in the bolt.
Printing
- Printed on Bambu X1 Carbon & Prusa MK3
- PLA, ABS or PETG
- 0.4mm print head
- 0.2mm layer height
- No supports
- 3 wall loops, and an 25% infill, closing wall gaps.
- Looks nice on a textured PEI sheet
Customisations
I have left the top surface smooth, so you can add an icon or letter on it. For example you can add a number indicating the size, or a double (refresh) arrow or …
Assembly
For most applications, it is sufficient to align the allen key hexagon of the thumbscrew head with the hexagon recess of the bolt, then firmly pressing them together. It's also possible to glue in place permanently with cyanoacrylate or similar glue. The head should stick firmly without glue tough, unless removed frequently.
