1 / 9
Prusa XL Mod collection
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My collection of Prusa XL mods
- Ocena
- 0 / 5
- Polubienia
- 35
- Pobrania
- 160
- Wydruki
- 1
- Wyświetlenia
- 2681
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (11)Wydruki i komentarze (Wydruki: 1) (Komentarze: 2)Remiksy (0)Kolekcje (80)Powiązane
My collection of upgrades for the Prusa XL printer:
- Two versions of tool trays. The trays are designed to be mounted on the front of the printer, on both sides of the LCD. You need to mirror one of the trays in the slicer.
- Glue stick holder for the large (1.4oz) stick like this one: https://www.amazon.com/gp/product/B07SX52Y8X
- Nozzle wiper brush holders for 1/8 inch shank brass brushes like these: https://www.amazon.com/gp/product/B081J7P7R6 (the height is adjusted by moving the entire holder up or down).
- USB cable bracket. I used a USB extender to move the USB port behind the LCD. The bracket is designed to fit this cable: https://www.amazon.com/gp/product/B0793P8XJK
- Tray for hotends, mounts on the top rail outside of the printer. There are several trays of different lengths. You need to print at least two mounts, maybe more for longer trays if you want zero flex. The mounts are glued to the bottom of the tray, use a short strand of filament to maintain alignment and for a stronger joint. If the filament holes are too thin, clean them out with a 1.8mm drill bit.
All parts are designed to be held by M3x10mm screws and M3 T-nuts for the 3030 extrusions, I use these: https://www.amazon.com/gp/product/ Everything is printed in CF PEGT.