1 / 9
Prusa XL Mod collection
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
My collection of Prusa XL mods
- Rating
- 0 / 5
- Likes
- 35
- Downloads
- 160
- Makes
- 1
- Views
- 2,681
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution
My collection of upgrades for the Prusa XL printer:
- Two versions of tool trays. The trays are designed to be mounted on the front of the printer, on both sides of the LCD. You need to mirror one of the trays in the slicer.
- Glue stick holder for the large (1.4oz) stick like this one: https://www.amazon.com/gp/product/B07SX52Y8X
- Nozzle wiper brush holders for 1/8 inch shank brass brushes like these: https://www.amazon.com/gp/product/B081J7P7R6 (the height is adjusted by moving the entire holder up or down).
- USB cable bracket. I used a USB extender to move the USB port behind the LCD. The bracket is designed to fit this cable: https://www.amazon.com/gp/product/B0793P8XJK
- Tray for hotends, mounts on the top rail outside of the printer. There are several trays of different lengths. You need to print at least two mounts, maybe more for longer trays if you want zero flex. The mounts are glued to the bottom of the tray, use a short strand of filament to maintain alignment and for a stronger joint. If the filament holes are too thin, clean them out with a 1.8mm drill bit.
All parts are designed to be held by M3x10mm screws and M3 T-nuts for the 3030 extrusions, I use these: https://www.amazon.com/gp/product/ Everything is printed in CF PEGT.