Filament roller guide & runout sensor mount for Ender 3 v2 Neo
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Ender 3 v2 Neo Filament guide with swivel arms and 2 pulleys - also has mount for filament runout sensor
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 75
- Wydruki
- 0
- Wyświetlenia
- 810
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
Patreon - https://patreon.com/CosmicNimbusPrinting
Cults3D - https://cults3d.com/en/users/CosmicNimbus
Hi there Ender 3 v2 / Neo user !
I have combined some parts from a few models and built a slightly over-engineered filament guide & runout sensor mount.
I've printed this all at 0.2 in PETG and 20% infill. Instead of buying 608 bearings, I chose to print this simple bearing that I have linked and attached the high tolerance version (which I have had the most luck with). I found the bearing would run a little smoother by adding a little bit of grease to it, and they have been spinning nicely for almost a year now.
To build this bad-boy you will need to print
- 1x Main body
- 2x Bearing inserts
- 4x Pulley halves
- Fast 608 bearing (or a bought one should fit too)
There are a couple of mistakes in the model, but Cura doesn't seem to mind fixing this for me 😁
Happy printing !