Y axis Pi Cam 3 Mount - Ender 3 v2 Neo
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a simple mount with embedded m3 screws holes for a pi cam module 3, which clips onto the Y axis bed handle
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 39
- Wydruki
- 0
- Wyświetlenia
- 651
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Patreon - https://patreon.com/CosmicNimbusPrinting
Cults3D - https://cults3d.com/en/users/CosmicNimbus
Hi there !
I wanted a simple mount for my pi camera module 3. Originally I made a mount that connected to the Y axis frame underneath the bed, but found it's performance mediocre due to it wobbling during prints and it was just too far from the subject. I really like the Y bed handle linked below, and the idea of the camera following the print, so decided to make a small mount that would clip onto the bed handle.
I remixed v2.1 of Freycraft's Pi camera module 3 case, which I think is fantastic !
You will need:
- 1x m3*12 bolts
- 2x m3*16 bolts
- 1x m3 washer
- 3x m3 locknuts
I put mine together with locknuts, but normal nuts will probably be fine (they may just loosen over time). The heads of the bolts and the nuts have inserts, so they disappear. It's probably best also to put a washer between the 2 connector pieces so it will move freely.
I printed mine in PETG on Cura's dynamic settings - which is 0.16mm quality. But it also works fine using fast settings.
I also used a piece of the Ender's cable wrap with some shrink-wrap to protect the pi cam cable
Here is the bed handle that the mount clips onto
https://www.thingiverse.com/thing:2957507
Happy printing !