Satsana Creality CR-10s PRO V2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fits the Creality CR10s PRO V2, with BL-Touch and a 5015 part cooling fan.
- Ocena
- 5 / 5
- Polubienia
- 4
- Pobrania
- 69
- Wydruki
- 1
- Wyświetlenia
- 541
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Remixed to fit the Creality CR10s PRO V2, with BL-Touch and a 5015 part cooling fan.
Made to fit heated inserts instead of hex nuts.
Optimized fan duct for better part cooling.
Print Settings
0.20mm layer height, 25% infill, no supports, PLA works fine.
Assembly:
Use two M3 heated inserts to mount the part cooling fan and one for the BL-Touch bracket.
Remove the original hot end cover and BL-Touch bracket.
Mount the fan duct to the back plate using the original mounting holdes at the top, and one of the holes for the original BL-Touch bracket with a nut on the back side. Make sure the nut dont touch the X-axis 2020 aluminium bar.
The BL-Touch is mounted with the circuit board outwards.
Note that the 5015 fan could be a tight fit.