Satsana Creality CR-10s PRO V2
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Fits the Creality CR10s PRO V2, with BL-Touch and a 5015 part cooling fan.
- Rating
- 5 / 5
- Likes
- 4
- Downloads
- 69
- Makes
- 1
- Views
- 541
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Remixed to fit the Creality CR10s PRO V2, with BL-Touch and a 5015 part cooling fan.
Made to fit heated inserts instead of hex nuts.
Optimized fan duct for better part cooling.
Print Settings
0.20mm layer height, 25% infill, no supports, PLA works fine.
Assembly:
Use two M3 heated inserts to mount the part cooling fan and one for the BL-Touch bracket.
Remove the original hot end cover and BL-Touch bracket.
Mount the fan duct to the back plate using the original mounting holdes at the top, and one of the holes for the original BL-Touch bracket with a nut on the back side. Make sure the nut dont touch the X-axis 2020 aluminium bar.
The BL-Touch is mounted with the circuit board outwards.
Note that the 5015 fan could be a tight fit.